Osram LS__PD MULTI 3 CI Bedienungsanleitung PDF herunterladen

OSRAM GmbH

Kunden Service Center

Customer-Service-Center (CSC)

Steinerne Furt 62

86167 Augsburg

Germany

Tel : +49 (0) 1803 677 - 200

(kostenpichtig / charges apply)

Fax.: +49 (0) 1803 677 - 202

www.osram.com

www.osram.de

40083219166482

4008321916648

Light and motion sensor

Fitting instructions

II 2009

LSPD_Multi3-CI_ma0902en_we1.01.indd

LS/PD MULTI 3 CI

A B

DALI MULTI 3

Sensor

Description

Function and application

The LS/PD MULTI 3 CI sensor detects the presence of people

and measures the intensity of ambient light.

The sensor is installed in ceilings.

Construction

The sensor is made up of the following components:

• Connection (A) for supply voltage, light measurement value,

motion signal and signal ground

• Housing (B)

• Aperture

• Light sensor (C)

• Motion sensor (D)

Installation

Safety instructions

The sensor must only be installed and put into operation by a

qualied electrician. The applicable safety regulations and ac-

cident prevention regulations must be observed.

WARNING!

Exposed, live cables or damaged housing.

Danger of electric shock!

• Only work on the sensor when it is de-energized.

CAUTION!

Destruction of the sensor and other devices through

incorrect mounting!

• Only use OSRAM control units of the following

types:

DALI MULTI 3/ DIM MULTI 3,

DALI MULTIeco/ MULTIeco, DALI PROFESSIO-

NAL Sensor Coupler.

• For SELV, ensure that there is sufcient insulati-

on from live parts.

• Do not connect control line with external voltage.

• Note the maximum total line length.

• Do not route the sensor line together with the

power or lamp line.

Adjusting the detection area

Limit the detection area:



Divide the aperture at the preset breaking points as required.



Pierce the cover with a pointed object to create the xing

holes.



Attach the aperture.

Continued on the back page!

Adjust the detection area:

Tilt the motion sensor up to 30° in the required direction.

Connecting the sensor

Connect the sensor using the supplied cable or a commercially

available 4-pin cable. If the cable is shortened or lengthened,

ensure that the wiring is correct.

Sensors can be connected in parallel via a Y-branch. For the

maximum number of sensors: see the separate control unit

manual.

E Y-branch (optional)

F Sensor

1 2

Inhaltsverzeichnis

Seite 1 - 40083219166482

OSRAM GmbH Kunden Service Center Customer-Service-Center (CSC) Steinerne Furt 62 86167 Augsburg GermanyTel : +49 (0) 1803 677 - 200 (kostenpichtig

Seite 2 - Appendix

Fitting (cont.)90°90°GHIK> hh40 mm19 mmØ 50mmThe CE requirements to EN 61347-11 are fullled. The EMC requirements to EN 61547 are fullled.Conform

Kommentare zu diesen Handbüchern

Keine Kommentare

Osram LS__PD MULTI 3 CI Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Osram LS__PD MULTI 3 CI herunter. OSRAM LS__PD MULTI 3 CI User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Osram LS__PD MULTI 3 CI

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Osram LSPD MULTI 3 CI herunter. OSRAM LSPD MULTI 3 CI User Manual Benutzerhandbuch