Osram Touch DIM WCU Bedienungsanleitung PDF herunterladen

Page 1 of 2

Wall transmitter

Fitting instructions

TOUCH DIM WCU

Description

Purpose and application

The TOUCH DIM WCU wall transmitter, in combination with a

TOUCH DIM RC radio receiver, enables the wireless control

of two luminaire groups, each with up to 15

electronic control

gears featuring the TOUCH DIM

function.

The wall transmitter can be screwed or glued onto smooth

surfaces.

Function

The TOUCH DIM WCU wall transmitter sends radio signals to

the radio receiver, which converts these and transmits them to

the connected electronic control gears.

The wall transmitter does not require batteries and is absolutely

maintenance-free. The necessary transmission energy is

generated by an integrated inductive energy converter when the

pushbutton is pressed.

Design

The wall transmitter is made up of the following components:

• Pushbutton for luminaire group (A) connected to channel 1

(Ch 1) of the radio receiver

• Pushbutton for luminaire group (B) connected to channel 2

(Ch 2) of the radio receiver

Installation

Safety instruction

The wall transmitter must only be installed and put into opera-

tionbyaqualiedelectrician.Theapplicablesafetyregulations

and accident prevention regulations must be observed.

Selecting the installation location

Observe the guide values for the radio transmission ranges

when selecting an installation location; see „Technical data“. If

necessary, perform a range test before installing the unit.

Do not mount the wall transmitter on metal or metal-coated

surfaces to avoid reducing the radio transmission range.

The radio transmission range between the wall transmitter and

radioreceiverisinuencedbythefollowingfactors:

• Construction materials

• Type and number of obstacles between the transmitter and

receiver

• Sourcesofinterferenceandsignalreections

Attaching the wall transmitter

The wall transmitter can be attached using screws or, if the

surface is smooth such as glass, painted walls, tiles, furniture,

wood, etc., using the supplied adhesive pad.

Attaching with screws



Remove the central plate from the wall transmitter and use it

as a template to mark the drill holes.



Drill Ø 5 mm dowel holes.



Attach the central plate in such a way that the tabs that

are closer together are situated on the left and right of the

central plate.



Clip the frame and then the wall transmitter onto the central

plate.

Attaching with adhesive



Attachtheadhesivelmovertheentirebackoftheassem-

bled wall transmitter.



Stick the wall transmitter onto a dry, dust-free and grease-

free surface.

1 2

TOUCH DIM WCU 1
40083210327370 2

Inhaltsverzeichnis

Seite 1 - TOUCH DIM WCU

Page 1 of 2Wall transmitter Fitting instructionsTOUCH DIM WCUDescriptionPurpose and applicationThe TOUCH DIM WCU wall transmitter, in combination with

Seite 2 - 40083210327370

Page 2 of 2OSRAM GmbH Kunden Service Center Customer-Service-Center (CSC) Steinerne Furt 62 86167 Augsburg GermanyTel : +49 (0) 1803 677 - 200 (kost

Kommentare zu diesen Handbüchern

Keine Kommentare

Osram Touch DIM WCU Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Osram Touch DIM WCU herunter. OSRAM Touch DIM WCU User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Osram Touch DIM WCU